大阪大学大学院医学系研究科 生体統御医学講座 麻酔集中治療医学教室

  • TOP
  • 麻酔学講座
  • 関連施設
  • 研究生・学生の方へ
  • 各種マニュアル
  • リンク集
  • 各種マニュアル
    大阪大学大学院医学系研究科 麻酔集中治療医学講座 TOP>各種マニュアル>Software library・ENGLISH

    Software library

    last update Sep 15, 2008

    News!!

    BSA for A2000 also can be available to BIS-XP, and it also can be available to BIS-VISTA (SerialPort settigs as "Legacy Binary"). I finally fixed the problems of BSA for BIS on Windows NT/2000/XP. Please download the latest version (V3.31B or V3.31B2), if you want to use Bsa for BIS (or Bsa for A2000) on Windows NT/2000/XP.
    This software library is supported by Satoshi Hagihira (Department of Anesthesiology, Osaka University Graduate School of Medicine). Each software is my handmade and runs under Micorsoft Windows 95/98/98SE/Me/2000/XP. I do not try to run on Win-VISTA, but it may be work well on Win-VISTA.
    Each download file is self-extracting type. When you execute the downloaded file, you may get a new directroy named DISK1, DISK2....
    Copy the contents of each directory to a floppy disk. Then run "Setup.exe" on DISK1 from "Startup menu".
    E-mail:hagihira@anes.med.osaka-u.ac.jp

    Information for "BSA" and "BSA for BIS" user

    I found a problem in calculation of some EEG parameter. I used "naturalized logarithm" " instead of "common logarithm" by mistake. As the result, relative beta ratio and Bisp ratio became about twice of the correct values. I corrected this. So please download again "Bsa" Ver 3.16, "Bsa for BIS" Ver 3.31B or "Bsa for A2000" Ver 3.31B2.
    "Bsa for A2000" also works with BIS-XP as well as BIS-A2000. And you can run "Bsa for BIS" and "Bsa for A2000" using "USB-Serial" converter such as KeySpan USA-19HS or others. .

    1.BSA (Bispectrum Analyzer) Ver 3.16

    BSA is a software for bispectral analysis of EEG. Bsa can gather EEG wave data via A/D converter (REX5054B, Ratoc co. ltd., Osaka Japan) and display raw waveform, powerspectrum and bispectrum in real time. BSA requires the system installed with Microsoft Windows 95 or 98 or 98SE or Me, Pentium 100MHz or faster CPU, at least 20M Bytes of memory and video system with at least 800x600(SVGA) resolution and more than 16-bit colors. Pentium 150MHz or fatser CPU and 32M Bytes (or more) of memory is recommended. PCMCIA type II slot is also required for Rex5054B.
    Although Rex5054B is not listed on Web page of Ratoc Inc, you can also purchase it from abroad. If you want to get Rex5054B, please directly send fax to Ratoc Inc.
    [Fax Number: +81-6(6633)3553 begin_of_the_skype_highlighting +81-6(6633)3553 end_of_the_skype_highlighting], or send E.mail to Mr. Saitoh.
    Download the following files, Bsa_v3.exe. As to the manual, please refer to here.
    This software won a "Grand prix" at the software contest in the 47th annual meeting of Japanese Society of Anesthesiologists held in Tokyo.

    2.BSA for BIS (Bispectrum Analyzer for A-1050) Ver 3.31B

    BSA for BIS is a software customized for BIS monitor (A-1050). BSA for BIS can get raw EEG wave as well as BIS Index or some other EEG derivates from BIS moni\tor. BSA for BIS also displays powerspectrum and bispectrum. BSA for BIS requires the system installed with Microsoft Windows 95 or 98 or 98SE or Me,Pentium 100MHz or faster CPU, at least 20M Bytes of memory and video system with at least 800x600(SVGA) resolution and more than 16-bit colors. Pentium 150MHz or fatser CPU and 32M Bytes (or more) of memory is recommended.
    This is the latest version of Bsa for BIS. I improved many features. I think this software helps your advanced BIS monitoring in clinical settings as well as in research. If you are using A-2000, please download the following A-2000 version.
    Download the following file, BsaBIS_v3.exe. As to the manual, please refer to here. The same manual files are attached with the software package.

    3. Bsa for BIS (A-2000版) Ver 3.31B2

     This is the latest release of BSA for BIS (A-2000). Unless you set the mode of A-2000 serial port as "Binary", BSA for BIS (A-2000) would not work well. Please refer to the manual. BSA for BIS (A-2000) works well with BIS-XP and BIS-VISTA.
    Download the following file, BsaBIS_A2000.exe. As to the manual, please refer to here. The same manual files are attached with the software package. If you want to run BSA_A2000 on Windows 95/98/98SE. Please download BsaBIS_A2000.exe.