Software library



last update Jan 04, 2012

JAPANESE VERSION(Japanese version is here)


News!!

BSA for A2000 also can be available to BIS-XP, and it also can be available to BIS-VISTA (SerialPort settigs as "Legacy Binary"). Recently, I changed my developing tool from C++Builder V5 to C++Builder XE2. If you want to use Bsa_A2000 on Windows 95/98, please download Bsa_V3.50.exe. The latest version of Bsa_A2000 is Bsa_A2000_V3.53.exe, which can be installed on Windows XP/2000/VISTA/7.

This software library is supported by Satoshi Hagihira (Department of Anesthesiology, Osaka University Graduate School of Medicine). Each software is my handmade and runs under Micorsoft Windows 95/98/98SE/Me or 2000/XP/VISTA/7.
Each download file is self-extracting type.

E-mail:hagihira—anes.med.osaka-u.ac.jp

Information for "BSA" and "BSA for BIS" user

I found a problem in calculation of some EEG parameter. I used "naturalized logarithm" " instead of "common logarithm" by mistake. As the result, relative beta ratio and Bisp ratio became about twice of the correct values. I corrected this. So please download again "Bsa" Ver 3.16, "Bsa for BIS" Ver 3.31B or "Bsa for A2000" Ver 3.31B2.
"Bsa for A2000" also works with BIS-XP as well as BIS-A2000. And you can run "Bsa for BIS" and "Bsa for A2000" using "USB-Serial" converter such as KeySpan USA-19HS or others.

INDEX

  1. BSA (Bispectrum Analyzer) Ver 3.16
  2. BSA for BIS (Bispectrum Analyzer for A-1050) Ver 3.31B
  3. BSA for BIS (Bispectrum Analyzer for A-2000) Ver 3.53
  4. SonoView Ver 0.12

1. BSA (Bispectrum Analyzer) Ver 3.16

BSA is a software for bispectral analysis of EEG. Bsa can gather EEG wave data via A/D converter (REX5054B, Ratoc co. ltd., Osaka Japan) and display raw waveform, powerspectrum and bispectrum in real time. BSA requires the system installed with Microsoft Windows 95 or 98 or 98SE or Me, Pentium 100MHz or faster CPU, at least 20M Bytes of memory and video system with at least 800x600(SVGA) resolution and more than 16-bit colors. Pentium 150MHz or fatser CPU and 32M Bytes (or more) of memory is recommended. PCMCIA type II slot is also required for Rex5054B.

Although Rex5054B is not listed on Web page of Ratoc Inc, you can also purchase it from abroad. If you want to get Rex5054B, please directly send fax to Ratoc Inc. [Fax Number: +81-6(6633)3553], or send E.mail to Mr. Saitoh.

Download the following files, Bsa_v3.exe. As to the manual, please refer to here.
This software won a "Grand prix" at the software contest in the 47th annual meeting of Japanese Society of Anesthesiologists held in Tokyo.

2. BSA for BIS (Bispectrum Analyzer for A-1050) Ver 3.31B

BSA for BIS is a software customized for BIS monitor (A-1050). BSA for BIS can get raw EEG wave as well as BIS Index or some other EEG derivates from BIS moni\tor. BSA for BIS also displays powerspectrum and bispectrum. BSA for BIS requires the system installed with Microsoft Windows 95 or 98 or 98SE or Me,Pentium 100MHz or faster CPU, at least 20M Bytes of memory and video system with at least 800x600(SVGA) resolution and more than 16-bit colors. Pentium 150MHz or fatser CPU and 32M Bytes (or more) of memory is recommended.
This is the latest version of Bsa for BIS. I improved many features. I think this software helps your advanced BIS monitoring in clinical settings as well as in research. If you are using A-2000, please download the following A-2000 version.
Download the following file, BsaBIS_v3.exe. As to the manual, please refer to here. The same manual files are attached with the software package.

3. BSA for BIS (A-2000) Ver 3.53B2

This is the first release of BSA for BIS (A-2000). Unless you set the mode of A-2000 serial port as "Binary", BSA for BIS (A-2000) would not work well. Please refer to the manual. BSA for BIS (A-2000) works well with BIS-XP and BIS-VISTA.
Download the following file, BsaBIS_A2000.exe. As to the manual, please refer to here. The same manual files are attached with the software package. If you want to run BSA_A2000 on Windows 95/98/98SE. Please download BsaBIS_A2000.exe.